Fernsteuerbefehle
R&S
®
RTB2000
455Bedienhandbuch 1333.1611.03 ─ 05
Verwendung: Nur Abfrage
BUS<b>:CAN:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
<o> *
Selects the byte number (1...m).
Rückgabewerte:
<ByteValue> Decimal value
Verwendung: Nur Abfrage
15.11.5.4 CAN-Suche
SEARch:PROTocol:CAN:CONDition................................................................................ 455
SEARch:PROTocol:CAN:FRAMe.....................................................................................456
SEARch:PROTocol:CAN:ACKerror.................................................................................. 457
SEARch:PROTocol:CAN:BITSterror.................................................................................457
SEARch:PROTocol:CAN:CRCerror.................................................................................. 457
SEARch:PROTocol:CAN:FORMerror................................................................................457
SEARch:PROTocol:CAN:FTYPe......................................................................................458
SEARch:PROTocol:CAN:ITYPe.......................................................................................458
SEARch:PROTocol:CAN:ICONdition................................................................................ 458
SEARch:PROTocol:CAN:IDENtifier.................................................................................. 458
SEARch:PROTocol:CAN:DLENgth...................................................................................458
SEARch:PROTocol:CAN:DCONdition...............................................................................459
SEARch:PROTocol:CAN:DATA........................................................................................459
SEARch:PROTocol:CAN:CONDition <SearchCondition>
Sets the event or combination of events to be searched for. Depending on the selected
event, further settings are required.
Analyse serieller Busse