Telephone Interface Functions
7-21
Require Dump Before Next Call
Requires that a phone call in progress be dumped before another
call can be made.
• Enter this command to prevent another call from being made before the
current call is dumped by the user or timeout timer.
• By default, another call can be made while one is in progress. The current
call will automatically be dumped.
• Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).
• This inhibits a user from dumping the patch with any command except the
patch dump command.
Command Form:
Command Form Data Digits
Require Dump Before Next Call (PW) 63 10 x * 0 = OFF (disabled)
1 = ON (enabled)
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Disabled, dump is not require before a new call.
Example:
To require that a current call is dumped before another call is made, enter the
following:
(PW) 63 10 1 *
To allow another call to be made while a call is in progress, enter the following:
(PW) 63 10 0 *
To Next Page
Loading...