7K • Chapter 7
7-42
Clear (or Enter) Rejected Number Table
Clears ALL rejected numbers from the Rejected Number Table—
or— enters a rejected number into same.
• The Rejected Number Table exists only in the controller’s memory. As such,
there is no printing of it in this manual.
• Up to 40 entries are permitted.
• One phone number up to 18 digits long may be entered in each command.
• The phone number may be a specific number or it may contain the A
character as a wild card.
• To clear the Rejected Number Table, enter nothing after the 67 root
number.
• To insert the phone number into the Rejected Number Table, enter the
phone number after the 67.
Command Form:
Command Form
Clear All Rejected Numbers From Table (PW) 67 *
Enter Rejected Number Into Table (PW) 67 (phone number) *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 too many digits entered (more than 18)
? err 2 illegal character entered (B, C, or D)
? full table is full
Default Condition: Rejected Number Table is empty
Examples:
Two telephone numbers, 345-6789 and 987-6543, are not permitted to be
dialed. To place them into the Rejected Number Table, enter the following:
(PW) 67 345 6789 *
(PW) 67 987 6543 *
To Next Page
Loading...