Repeater Functions
18-9
Select (Review) Courtesy Messages
Program unique Courtesy Messages for each receiver.
• Enter the password, the 4-digit root number, the desired message, and a
(*).
• Any message may be any combination of message types including CW,
beeps, page tones, speech, etc.
• The maximum size of any message is 50 bytes (50 2-digit codes).
• You must count the control character. Therefore, any message could have
46 CW characters, 23 synthesized speech words, and so on.
• To delete a message, enter the password, the 4-digit root number, and the
(*). Do not enter any message.
Command Form:
Command Form
Select Courtesy Message for Rx1 (PW) 31 10 (message) *
Select Courtesy Message for Rx2 (PW) 31 11 (message) *
Select Courtesy Message for Rx3 (PW) 31 12 (message) *
Review Courtesy Message for Rx1 (PW) 34 10 *
Review Courtesy Message for Rx2 (PW) 34 11 *
Review Courtesy Message for Rx3 (PW) 34 12 *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition:
Command Default Condition
Select Courtesy Message for Rx1 60mS 440 Hz beep (9910 74 09)
Select Courtesy Message for Rx2 60mS 660 Hz beep (9910 74 16)
Select Courtesy Message for Rx3 60mS 880 Hz beep (9910 74 21)
To Next Page
Loading...
Need help?
General