Remote Base Interface
21-21
User Function: Enable/Disable Receiver
Enables or disables the receiver on the currently active remote
base radio.
• The receiver can be enabled or disabled.
Command Form:
Command Form
Enable/Disable Receiver (RBPW) 44 x *
0 = OFF (disable)
1 = ON (enable)
Macro: Select Enable/Disable Receiver
(Stored until (RBPW) 39 sent.)
(RBPW) 24 x *
Acknowledgment: Sends OK
Errors:
Error Meaning
OFF remote base is disabled
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: The receiver is enabled when a VFO frequency or memory
channel is selected.
Example:
To enable the receiver, enter the following:
(RBPW) 44 1 *
To disable the receiver, enter the following:
(RBPW) 44 0 *
To Next Page
Loading...