S-COM 7K - Delete One or More Setpoints

7K • Chapter 9
9-6
Delete One or More Setpoints
Deletes a single setpoint or a range of setpoints from the Scheduler
program.
• To delete a single setpoint, enter just the setpoint number.
• To delete a range of setpoints, enter the first and last setpoint number to be
deleted.
• Enter the 2-digit setpoints 00-99. Use a leading zero, if required.
Command Form:
Command Form Data Digit
Delete One Setpoint (PW) 28 (setpoint) * 00-99, setpoint
number
Delete Range of Setpoints (PW) 28 (first
setpoint) (last
setpoint) *
00-99, setpoint
number
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: No setpoints exist.
Example:
To delete setpoints 4 through 26, enter the following:
(PW) 28 04 26 *
To delete a single setpoint, 14, enter the following:
(PW) 28 14 *