S-COM 7K - Select Phone Line Answer Mode

Telephone Interface Functions
7-53
Select Phone Line Answer Mode
Selects one of the Phone Line Answer Modes (and associated
Ring-In Delay and Ringout Limit).
• Mode 0 is for “do not answer.”
• Modes 1–4 are fully discussed in the Phone Line Answer Modes section on
page 7-50.
• Ring-in delay is 00 to 99 rings.
• Ringout limit is 00 to 99 rings.
Command Form:
Command Form Data Digit
Select Phone Line Answer Mode (Do Not
Answer Only)
(PW) 64 x * x = 0 (do not answer)
Select Phone Line Answer Mode (PW) 64 x yy zz * x = mode 1–4
see page 7-50
y = ring-in delay
(00–99)
= (00–99) rings
z = ringout limit
(00–99)
= (00–99) rings
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Mode = 3, Ring-In Delay = 2, Ringout Limit = 10