S-COM 7K - Select Talkout Transmitter Mode

7K • Chapter 19
19-4
Select Talkout Transmitter Mode
Selects either Repeater Mode or Base Station Mode for phone line
talkout applications.
• In Repeater Mode, transmitter #1 stays keyed during the entire
conversation. This is the usual mode for all repeater autopatch applications.
• In Base Station Mode, transmitter #1 is keyed and unkeyed by the (*) and
(#) characters sent by the phone line party.
• This command works only when the Enable/Disable Star/Pound Talkout
command is enabled (page 19-2).
• The selected mode does not change when the call is terminated.
Command Form:
Command Form Data Digit
Select Talkout Transmitter Mode (PW) 63 14 x * 0 = Repeater Mode
1 = Base Station
Mode
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Repeater Mode is selected