7K • Chapter 7
7-34
Go Off-Hook
Causes the phone line to go off-hook.
• Enter this command to cause the phone line to go off-hook without dialing a
phone number. This is like picking up a phone and getting dial tone.
• A second version of the command ignores the Busy Logic Input. This is like
picking up an extension telephone while the telephone line is already in use.
• This command has no effect if an autopatch or reverse patch is in progress.
Command Form:
Command Form
Go Off-Hook (PW) 83 2 *
Go Off-Hook, Ignore Busy Logic Input (PW) 83 3 *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: None
Example:
To go off-hook on the patch, enter the following:
(PW) 83 2 *
To go off-hook on the patch even if the Busy Logic Input signals that the line is
busy, enter the following:
(PW) 83 3 *
To Next Page
Loading...