7K • Chapter 11
11-12
Select DTMF Digit-Decoded Macro
Assigns a macro to be triggered when a DTMF digit is decoded.
• Can be used to implement a DTMF cover tone.
• Enter the 4-digit macro name desired. Use leading zeros if needed.
• To delete a macro, enter the command with no macro name.
Command Form:
Command Form
Select DTMF Digit-Decoded Macro (PW) 26 49 (macro name) *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: None assigned.
To Next Page
Loading...