7K • Chapter 7
7-36
Select Autopatch Call Types
Selects the types of calls permitted by the autopatch.
• Entering this command will dump any autopatch call in progress.
• If the call type being selected is different from the one currently selected,
the autopatch redialer memory is cleared.
• Enter up to 8 digits from the Autopatch Call Types Table below.
• Entering no digits turns off the autopatch.
• Entering any digit from 0-8 will permit accepted numbers.
Command Form:
Command Form Data Digits
Select Autopatch Call Types (PW) 60 x * (0-8) Autopatch Call
Types Table below
Data Digit Autopatch Call Types Explanation
none no calls permitted autopatch OFF (disabled)
0 accepted numbers only accepted numbers only (see page 7-38)
1 0 operator
2 xxx-xxxx 7-digit local call
3 0-xxx-xxxx 7-digit operator-assisted/credit card call
4 1-xxx-xxxx 7-digit long distance call
5 0-xxx-xxx-xxxx 10-digit operator-assisted/credit card call
6 1-xxx-xxx-xxxx 10-digit long distance call
7 1-800-xxx-xxxx
1-888-xxx-xxxx
toll free call
8 xxx-xxx-xxxx 10-digit local call
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Autopatch is OFF (disabled), no calls permitted.
To Next Page
Loading...