7K • Chapter 4
4-18
Owner-Fixed Frequency Beeps
Six (6) beeps are definable in frequency by the owner, and have variable
duration. The beeps default to factory-selected frequencies upon a cold start.
The frequencies may be changed, and the new frequencies will be retained
upon a warm start. These beeps are programmed with the character
codes 48-53.
The following table shows the Owner-Fixed Frequency Beeps:
Owner-Fixed Frequency Beeps
Control Character 9910
Beep Owner-Fixed Frequency (Fill-In) Default Condition
48 500Hz
49 750Hz
50 1000Hz
51 1250Hz
52 1500Hz
53 1750Hz
To Next Page
Loading...