7K • Chapter 21
21-20
User Function: Enable/Disable Transmitter
Enables or disables the transmitter on the currently active remote
base radio.
• The transmitter can be enabled or disabled.
Command Form:
Command Form
Enable/Disable Transmitter (RBPW) 45 x *
0 = OFF (disable)
1 = ON (enable)
Macro: Select Enable/Disable Transmitter
(Stored until (RBPW) 39 sent.)
(RBPW) 25 x *
Acknowledgment: Sends OK
Errors:
Error Meaning
OFF remote base is disabled
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: The transmitter is disabled when the Select VFO
Frequency and Offset is entered without an offset. The transmitter is disabled
when a memory channel is selected.
Example:
To enable the transmitter, enter the following:
(RBPW) 45 1 *
To disable the transmitter, enter the following:
(RBPW) 45 0 *
To Next Page
Loading...