DTMF Decoder
11-11
Select DTMF Long Tone Macros
Assigns a macro to be executed by the Long Tone shown.
• Enter the password, the 4-digit root number, the macro you wish to have
executed by the long tone, and the (*).
• If the macro has fewer than 4 digits, enter leading zeroes
• If you wish to prevent a macro from being executed that was previously
assigned, enter just the password, the 4-digit root number, and the (*).
Command Form:
Command Form
Assign Macro to Long Tone Zero (PW) 26 50 (macro name) *
Assign Macro to Long Tone One (PW) 26 51 (macro name) *
Assign Macro to Long Tone Two (PW) 26 52 (macro name) *
Assign Macro to Long Tone Three (PW) 26 53 (macro name) *
Assign Macro to Long Tone Four (PW) 26 54 (macro name) *
Assign Macro to Long Tone Five (PW) 26 55 (macro name) *
Assign Macro to Long Tone Six (PW) 26 56 (macro name) *
Assign Macro to Long Tone Seven (PW) 26 57 (macro name) *
Assign Macro to Long Tone Eight (PW) 26 58 (macro name) *
Assign Macro to Long Tone Nine (PW) 26 59 (macro name) *
Assign Macro to Long Tone A (PW) 26 60 (macro name) *
Assign Macro to Long Tone B (PW) 26 61 (macro name) *
Assign Macro to Long Tone C (PW) 26 62 (macro name) *
Assign Macro to Long Tone D (PW) 26 63 (macro name) *
Assign Macro to Long Tone Star (*) (PW) 26 64 (macro name) *
Assign Macro to Long Tone Pound (#) (PW) 26 65 (macro name) *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: No macros assigned
To Next Page
Loading...