Product Description
1-1
Chapter 1
Product
Description
The S-COM 7K is a high-quality, compact, microprocessor-based repeater
controller intended for use in amateur radio and commercial installations.
Incorporating advanced hardware and software designs, the 7K provides most-
often-needed control functions and powerful new features not found in any
comparably priced controller.
• The 7K is fully remotely programmable via DTMF commands over the
telephone or receiver ports—eliminating the inconvenience of returning
EPROMs, microcontroller ICs, and boards to the factory for reprogramming.
• No jumpers of diodes are needed for programming.
• Data is retained in non-volatile memory, ensuring that no information is lost
during power outages, making extra trips to the repeater site unnecessary.
To Next Page
Loading...