7K • Chapter 20
20-6
Start Timer (One-Shot)
Starts the selected timer as a one-shot timer.
• Enter the 2-digit timer number. Use a leading zero.
• If the timer is stopped, the timer is set to zero time expired and started.
• If the timer is running, the command is ignored.
Command Form:
Command Form Data Digit
Start Timer (One-Shot) (PW) 49 (timer) 04 * from table below
Data Digit Explanation
timer, 00-09 select one of 10 timers, 2 digits are required
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: None.
Example:
To start one-shot timer 00, enter the command:
(PW) 49 00 04 *
To start one-shot timer 08, enter the command:
(PW) 49 08 04 *
To Next Page
Loading...