7K • Chapter 21
21-22
User Function: Enable/Disable Radio Power
Enables or disables the power to the currently active remote base
radio.
• The radio power can be enabled or disabled.
• Note: not all radios that can be connected to the RBI-1 can have their
power controlled. See the RBI-1 manual for details.
Command Form:
Command Form
Enable/Disable Radio Power (RBPW) 46 x *
0 = OFF (disable)
1 = ON (enable)
Macro: Select Enable/Disable Radio Power
(Stored until (RBPW) 39 sent.)
(RBPW) 26 x *
Acknowledgment: Sends OK
Errors:
Error Meaning
OFF remote base is disabled
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Radio power is enabled when a VFO frequency or memory
channel is selected.
Example:
To turn the power on to the selected radio, enter the following:
(RBPW) 46 1 *
To turn the power off to the selected radio, enter the following:
(RBPW) 46 0 *
To Next Page
Loading...