Programming Tables
A-17
Message Control Characters
Control Character Definition
9900 CW characters follow
9910 beep characters follow
9920 single-tone page follows
9930 two-tone page follows
9940 5/6-tone page follows
9950 DTMF characters follow
9960 synthesized speech characters follow
9981 route this message to transmitter #1 mixed with other audio
9982 route this message to transmitter #1 not mixed with other audio
9983 route this message to transmitter #2 mixed with other audio
9984 route this message to transmitter #2 not mixed with other audio
9985 route this message to phone line mixed with Rx audio
9986 route this message to phone line not mixed with Rx audio
9987 do not route remaining message audio to transmitter #1
9988 do not route remaining message audio to transmitter #2
9989 do not route remaining message audio to phone line
9990 save current routing settings
9991 restore saved routing settings
9999 xxxx execute macro xxxx after prior message audio has been sent
To Next Page
Loading...