S-COM 7K - Reset Transmitter Timeout Timer

Transmitter Functions
17-7
Reset Transmitter Timeout Timer
Resets the Transmitter Timeout Timer.
• If the transmitter timeout timer has been exceeded, this command will allow
the transmitter to return to the air.
Command Form:
Command Form
Reset Transmitter Timeout Timer (PW) 10 *
Acknowledgment: None
Errors: None
Default: None
Examples:
If the transmitting station has caused a timeout to occur, the receiving station
may be able to bring the transmitter back up. To do so would require the
receiving station to be able to override the offending station at the repeater site.
Entering the Reset Transmitter Timeout Timer command will reload the timer
as well as return the repeater transmitter to the air.