S-COM 7K - Assign Remote Base Password

7K • Chapter 21
21-4
Assign Remote Base Password
Assigns a new password for remote base users.
• The new Remote Base Password may be 2, 4, or 6 digits in length.
• The new Remote Base Password may be any combination of the numbers
0-9 and the letters A-D.
Command Form:
Command Form
Assign Remote Base Password (PW) 39 02 (new remote base password) *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
Default Condition: Remote Base Password defaults to 98.
Example:
To change the remote base password to 22, enter the following:
(PW) 39 02 22 *