S-COM 7K - Root Numbers (Commands) by Number

7K • Appendix A
A-22
Root Numbers (Commands) by Number
Page Number Description
17-9 00 Key Transmitter (Timed)
10-2 02 Enable/Disable CTCSS Encoder
10-3 03 Select Frequency of CTCSS
4-12
4-19
06 Select Frequency of CW/Beep
17-7 10 Reset Transmitter Timeout Timer
4-13 11 Send Next CW Message Slowly
4-14 12 Select Normal CW Speed
4-14 13 Select Slow CW Speed
4-42 15 Send Message
6-5 20 Create New Macro
6-11 21 Erase Macro
6-12 22 Erase All Macros
7-32 23 Change Autopatch Access Password
8-2 25 Set Clock and Calendar
A-24 26 Set Event-Triggered Macro (See table page A-24.)
6-13 27 Rename Macro
9-2
9-6
28 Create Scheduler Setpoint
6-7 29 Append to Macro
17-4 30 Select Transmitter Dropout Delay
A-27 31 Select Message (See table page A-27.)
17-3 32 Select Transmitter Courtesy Delay
6-9 33 List Macro in CW
A-27 34 Review Message (See table page A-27.)
6-9 35 List Macro in Speech
21-4 39 02 Assign Remote Base Password
21-29 39 90 Select RBI-1 Number of User Function Outputs in Group
21-7 39 91 Reset RBI-1
17-5 40 Select Transmitter Timeout Timer
18-4 45 Select Repeater Activity Counter/Timer
16-4 47 Select COR Pulse Parameters
8-4
8-6
48 Adjust Daylight Savings Time
20-1
A-29
49 User Timers
Set xxx.x Seconds Timers (See table page A-29.)
12-10 50 Select ID Tail Message
12-5 51 Select ID Message Interval
12-7 54 Reset Initial ID Message to Normal ID Message for Tx1