7K • Chapter 21
21-26
User Function: Enable/Disable CTCSS Decoder
Enables or disables the CTCSS Decoder on the currently active
remote base radio.
• The CTCSS Decoder can be enabled or disabled.
• This command has no effect if a memory channel of the currently active
radio is selected and the memory channel enables the CTCSS Encoder or
Decoder.
Command Form:
Command Form
Enable/Disable CTCSS Decoder (RBPW) 49 x *
0 = OFF (disable)
1 = ON (enable)
Macro: Select Enable/Disable CTCSS
Decoder
(Stored until (RBPW) 39 sent.)
(RBPW) 29 x *
Acknowledgment: Sends OK
Errors:
Error Meaning
OFF remote base is disabled
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: The CTCSS Decoder is disabled when a CTCSS
frequency is selected. The CTCSS Decoder is also disabled when a VFO
frequency is selected.
Example:
To enable the CTCSS Decoder in the selected radio, enter the following:
(RBPW) 49 1 *
To disable the CTCSS Decoder in the selected radio, enter the following:
(RBPW) 49 0 *
To Next Page
Loading...