7K • Chapter 4
4-14
Select CW Speed
Select Normal CW Speed changes the speed at which CW
messages are normally sent.
Select Slow CW Speed changes the speed at which CW
messages are sent when preceded by the Send Next Message
Slowly command.
A single digit from 0–9 programs the desired speed.
• See the CW Speed Table below.
Command Form:
Command Form Data Digit
Select Normal CW Speed (PW) 12 x * CW Speed Table
Select Slow CW Speed (PW) 13 x * CW Speed Table
Data Digit CW Speed Data Digit CW Speed
0 5 WPM 5 17 WPM
1 7 WPM 6 20 WPM
2 10 WPM 7 24 WPM
3 13 WPM 8 30 WPM
4 15 WPM 9 40 WPM
Note: The above CW Speed Table is based on the number of milliseconds
duration of an element of CW (a dit = 1 element, a dah = 3 elements). Five
WPM corresponds to 240 mS/element, 7 WPM corresponds to 170
mS/element, 10 WPM corresponds to 120 mS/ element, and so on.
Acknowledgment: Sends OK
To Next Page
Loading...