S-COM 7K - Command Redial Last Number

Telephone Interface Functions
7-45
Redial Last Number
Redials the last valid number entered into the autopatch.
• The Redial Last Number command works up to 30 minutes from the time
the last call was placed.
• If more than 30 minutes have elapsed, the controller will send CLR (dialer
cleared) at each redial attempt.
• The 30 minute autopatch redialer timer will be reset at each redial.
• Do not use the Redial Last Number command if you have not been
monitoring the repeater for a while, since another call may have been
placed since your last call.
Command Form:
Command Form
Redial Last Number (PW) 84 *
Acknowledgment: None
Errors: None
Default Condition: Autopatch Redialer memory is cleared