S-COM 7K - Select Anti-Kerchunker Parameters

7K • Chapter 18
18-6
Select Anti-Kerchunker Parameters
Programs the “Anti-Kerchunk” Key-up Delay and Re-Arm Delay for
the repeater.
• Users must key for the selected length of time before the repeater
transmitter keys.
• Once the Key-Up Delay is exceeded, the feature is disabled.
• The anti-kerchunker is Re-Armed if no activity is present for a selected
length of time after the repeater transmitter drops.
Command Form:
Command Form Data Digit
Select Key-Up Delay (PW) 80 xx * xx = duration =
(00–99) = (0.0–9.9)
seconds
Select Re-Arm Delay (PW) 99 10 xx * xx = duration =
(00–99) = (0.0–9.9)
minutes
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Key-Up Delay is 0 seconds; Re-Arm Delay is to 0 minutes