S-COM 7K - Macro Function: Send Queued Settings

Remote Base Interface
21-27
Macro Function: Send Queued Settings
Transfers the queued Macro settings to the remote base radio.
• The settings entered from the Macro commands are stored in the controller
memory until this command is executed.
• Settings are queued using Macro commands 20-29.
Command Form:
Command Form
Send Queued Settings (RBPW) 39 *
Acknowledgment: Sends OK
Errors:
Error Meaning
OFF remote base is disabled
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: None.
Example:
To send the queued settings stored in the controller memory to the remote
base radio, enter the following:
(RBPW) 39 *