S-COM 7K - Select Reverse Patch Ring-Triggered Macro

Telephone Interface Functions
7-63
Select Reverse Patch Ring-Triggered Macro
Assigns a macro to be executed at the end of each ring on the
phone line.
• This macro is repeated at each ring by the reverse patch program.
• Enter the 4-digit macro name using leading zeroes if the macro name is
less than 4 digits.
• To delete the assignment, enter the command with no macro name.
Command Form:
Command Form
Select Ring-Triggered Macro (PW) 26 80 (macro name) *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: No macro assigned.
Example:
To assign macro 9001 to execute at each ring, enter the following:
(PW) 26 80 9001 *