Remote Base Interface
21-1
Chapter 21
Remote Base
Interface
Your controller has many features that allow you to customize the operation of
the controller when connected to a Doug Hall Electronics RBI-1 Remote Base
Interface. All of the capabilities of the RBI-1 are supported.
The 7K Remote Base Interface has the following features:
• All remote base user functions use a password that is different from the
Master, Control Operator, or Autopatch Passwords defined within the
controller. Because of this, users do not need to know these passwords to
use the remote base functions.
• User functions are optimized to minimize the number of keystrokes users
must enter to perform common functions.
• Macros can be used to define memory channels.
• Direct frequency entry allows easy frequency and transmitter offset
changes.
• The time-of-day scheduler can be used to control when the remote base
functions are available.
• The controller can speak the current radio configuration.
• Eight additional logic outputs on the RBI-1 are available for controlling
external devices.
To Next Page
Loading...