7K • Chapter 14
14-2
Assign Macro To Logic Input
Assigns a macro to be executed by the transition shown.
• Enter the password, the 4-digit root number, the macro you wish to have
executed on the transition, and the (*).
• If the macro name has fewer than four digits, enter leading zeroes.
• If you wish to prevent a macro from being executed that was previously
assigned, enter just the password, the 4-digit root number, and the (*).
Command Form:
Command Form
Assign Macro to Logic Input 1 Hi-to-Lo (PW) 26 20 (macro name) *
Assign Macro to Logic Input 1 Lo-to-Hi (PW) 26 21 (macro name) *
Assign Macro to Logic Input 2 Hi-to-Lo (PW) 26 22 (macro name) *
Assign Macro to Logic Input 2 Lo-to-Hi (PW) 26 23 (macro name) *
Assign Macro to Logic Input 3 Hi-to-Lo (PW) 26 24 (macro name) *
Assign Macro to Logic Input 3 Lo-to-Hi (PW) 26 25 (macro name) *
Assign Macro to Logic Input 4 Hi-to-Lo (PW) 26 26 (macro name) *
Assign Macro to Logic Input 4 Lo-to-Hi (PW) 26 27 (macro name) *
Assign Macro to Logic Input 5 Hi-to-Lo (PW) 26 28 (macro name) *
Assign Macro to Logic Input 5 Lo-to-Hi (PW) 26 29 (macro name) *
Assign Macro to Logic Input 6 Hi-to-Lo (PW) 26 30 (macro name) *
Assign Macro to Logic Input 6 Lo-to-Hi (PW) 26 31 (macro name) *
Assign Macro to Phone Line Busy Input
Hi-to-Lo
(PW) 26 32 (macro name) *
Assign Macro to Phone Line Busy Input
Lo-to-Hi
(PW) 26 33 (macro name) *
Assign Macro to COR Input 1 Hi-to-Lo (PW) 26 34 (macro name) *
Assign Macro to COR Input 1 Lo-to-Hi (PW) 26 35 (macro name) *
Assign Macro to COR Input 2 Hi-to-Lo (PW) 26 36 (macro name) *
Assign Macro to COR Input 2 Lo-to-Hi (PW) 26 37 (macro name) *
Assign Macro to COR Input 3 Hi-to-Lo (PW) 26 38 (macro name) *
Assign Macro to COR Input 3 Lo-to-Hi (PW) 26 39 (macro name) *
Assign Macro to PL Input 1 Hi-to-Lo (PW) 26 40 (macro name) *
Assign Macro to PL Input 1 Lo-to-Hi (PW) 26 41 (macro name) *
Assign Macro to PL Input 2 Hi-to-Lo (PW) 26 42 (macro name) *
Assign Macro to PL Input 2 Lo-to-Hi (PW) 26 43 (macro name) *
Assign Macro to PL Input 3 Hi-to-Lo (PW) 26 44 (macro name) *
Assign Macro to PL Input 3 Lo-to-Hi (PW) 26 45 (macro name) *
To Next Page
Loading...