7K • Chapter 20
20-4
Stop Timer
Stops the one-shot or retriggerable timer.
• Enter the 2-digit timer number. Use a leading zero.
• If the timer is running, it is stopped without triggering the macro.
• If the timer is stopped or has timed out, this command has no effect.
Command Form:
Command Form Data Digit
Stop Timer (PW) 49 (timer) 00 * from table below
Data Digit Explanation
timer, 00-09 select one of 10 timers, 2 digits are required
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: None.
Example:
To stop timer 00, enter the command:
(PW) 49 00 00 *
To stop timer 09, enter the command:
(PW) 49 09 00 *
To Next Page
Loading...