Telephone Interface Functions
7-25
Select Autopatch Timeout Timer
Programs the maximum duration of an autopatch call.
• After the root number, enter 1, 2, or 3 digits representing the desired time in
tenths of minutes.
• The range of the timer is 0.1 minutes to 54.6 minutes. For example, 1 = 0.1
minutes (6 seconds); 30 = 3.0 minutes; 546 = 54.6 minutes.
• Leading zeroes are not required, so entering 030 for 3.0 minutes is the
same as entering 30.
• Enter 000 for infinity (timer disabled).
Command Form:
Command Form Data Digit
Select Autopatch Timeout Timer (PW) 65 xxx * 000 = infinity
(001–546) =
(0.1–54.6) minutes
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit, or out of limit
Default Condition: Autopatch Timeout Timer is 3.0 minutes
Examples:
To set the timeout timer to 4.5 minutes, enter:
(PW) 65 45 *
To set the timeout timer to infinity, enter:
(PW) 65 000 *
To set the timer to 54.6 minutes (the maximum allowed without disabling the
autopatch timeout timer), enter
(PW) 65 546 *
To Next Page
Loading...