7K • Chapter 18
18-8
Select Anti-Kerchunk No Hangtime Mode
Allows the programmer to modify the operation of the
Anti-Kerchunker.
• By default and when disabled, the Anti-Kerchunker does not key the
transmitter during the Key-Up Delay.
• By enabling the No Hangtime Mode, the transmitter is keyed during the
Key-Up Delay.
• Enter one digit, 0 for OFF (disabled), 1 for ON (enabled).
Command Form:
Command Form Data Digit
Select Anti-Kerchunk No Hangtime Mode (PW) 63 30 x * 0 = OFF (disabled)
1 = ON (enabled)
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: Disabled.
To Next Page
Loading...