Scheduler
9-1
Chapter 9
Scheduler
The 7K Controller features a powerful Scheduler program which accepts up to
100 time/date Setpoints. Each setpoint can be programmed to execute a
macro based on the month, day-of-month, day-of-week, hour, and minute of
the real-time clock and calendar, eg. midnight, December 31st. Wildcards can
be used to program recurring setpoints, eg. 9:00 AM on the first Saturday of
each month.
The setpoints are compared to the real-time clock/calendar at the start of each
new minute. If a match is found, the setpoint’s accompanying Macro command
is executed.
Since the real-time clock has a lithium power source, time-keeping is not
affected by loss of main power.
Leap years are automatically adjusted. The real-time clock and Scheduler are
Year-2000 compliant.
To Next Page
Loading...