7K • Chapter 1
1-4
Clock and Calendar
Time and date information may be obtained by inserting one or more Run-Time
Variables into any programmable message. CW readout is available from the
main board. Male and female voice readout is available if the optional SSM
board is installed.
A 100-setpoint Scheduler executes commands at programmable times and
dates.
Logic Inputs and Outputs
Logic inputs are used to detect a change of state in monitored devices at the
repeater site. Logic outputs can be manipulated by command to pulse or latch
a controlled device at the site.
Command Language
Commands are given to the 7K with an easy-to-use DTMF language. Security
is enhanced with a Password (PW) system, as well as programmable
restrictions on DTMF decode operation. A library of Macros may be defined for
repeater users. Macros may be created, deleted, renamed, and modified at any
time by authorized programmers.
To Next Page
Loading...