Scheduler
9-5
Note: When using wildcards, be sure of their function. For example, if you
create a setpoint where Month = 01, Day = 01, Hour = 00, and Minute = 00, the
macro will execute at midnight, January 1st. If you accidentally set Month = 01,
Day = 01, Hour = 99, and Minute = 99, assuming the macro will execute at the
start of January 1st, the unexpected will happen: the macro will execute every
minute of every hour for as long as it is January 1st (that is, from 00:00 January
1st until and including 12:59 PM (23:59) January 1st).
Suggested uses for the Scheduler include:
• Change the phone number dialed by a macro.
• Enable and disable a feature based on time of day (weekends could be
different from weekdays).
To Next Page
Loading...