Telephone Interface Functions
7-27
Select (Review) Autopatch Timeout Warning Message
Programs (and reviews) the message that is sent during the last 30
seconds—before timeout—of the autopatch call.
• The Autopatch Timeout Warning Message is sent by the controller every 5
seconds for the last 30 seconds of an autopatch call.
• If the mobile station unkeys for a few seconds during the last 30 seconds of
the timer, the operator will recognize that the call is about to be terminated.
• Maximum message length is 25 characters.
Command Form:
Command Form
Select Autopatch Timeout Warning Message (PW) 31 41 (message) *
Review Autopatch Timeout Warning Message (PW) 34 41 *
Acknowledgment: Sends the Autopatch Timeout Warning Message (or OK, if
none)
Errors:
Error Meaning
? err 1 too many digits entered
? err 2 illegal CW Character entered
Default Condition: Autopatch Timeout Warning Message is AR in CW
Examples:
We suggest the autopatch timeout warning messages be noticeable enough
that the mobile takes immediate action to either terminate the call or reset the
autopatch timer. A sequence of beeps or DTMF digits might be a good
attention-getting message in this application.
To Next Page
Loading...