7K • Chapter 17
17-10
Key Transmitter (Untimed)
Keys the specified transmitter (TX1 or TX2) until canceled.
• The specified transmitter will not key under these commands if it has been
disabled using the Enable/Disable Transmitter command on page 17-8.
• Enter one digit, 0 for OFF (cancel), 1 for ON (key).
• The transmitter will remain keyed indefinitely, until canceled.
Command Form:
Command Form Data Digit
Key Transmitter 1 (Untimed) (PW) 63 41 x * 1 = key
0 = cancel key
Key Transmitter 2 (Untimed) (PW) 63 42 x * 1 = key
0 = cancel key
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Conditions: Both Transmitters TX1 and TX2 are not requested to key
To Next Page
Loading...