S-COM 7K - Select;Review;Play User Messages

Messages
4-41
Select/Review/Play User Messages
Selects, changes, or reviews general purpose user-defined
messages.
• Enter the password, followed by the 4-digit root number shown, followed by
the desired message.
• Any message may have any combination of message types, including CW,
beeps, page tones, speech, etc.
• The maximum size of any message is 50 bytes (50 2-digit codes).
• You must count the control character. Therefore, any message could have
46 CW characters, 23 synthesized speech words, etc.
• To delete a message, enter the password, the 4-digit root number, and the
(*) (do not enter any message).
Command Form:
Command Form
Select User Message #1 (PW) 31 70 (message) *
Select User Message #2 (PW) 31 71 (message) *
Select User Message #3 (PW) 31 72 (message) *
Select User Message #4 (PW) 31 73 (message) *
Review/Play User Message #1 (PW) 34 70 *
Review/Play User Message #2 (PW) 34 71 *
Review/Play User Message #3 (PW) 34 72 *
Review/Play User Message #4 (PW) 34 73 *
Acknowledgment: Sends OK
Errors:
Error Meaning
? err 1 wrong number of digits entered
? err 2 illegal digit entered
Default Condition: No message.