7K • Chapter 6
6-6
(PW) 20 006A (PW) 70 1 *
• If additional commands are to be executed by entering 6A, they can be
appended. See the Append to Macro command on page 6-7.
Note: The macro name is entered with leading zeroes, since the name chosen
is less that 4 digits long. Also, the command following the macro name is a
complete command, including password.
The acknowledgment message OK simply indicates that the Create New Macro
command was entered correctly, and that the controller created a new directory
entry with some digits stored in memory. It does not guarantee that the digits it
stored represented an executable command. It is possible to store garbage
digits in a macro just as easily as legitimate commands.
To Next Page
Loading...