Sel SEL-787 - Page 15

xiiiList of Figures
Date Code 20150130 Instruction Manual SEL-787 Relay
Figure 4.58 Example of the Effects of the Input Precedence...................................................................... 4.79
Figure 4.59 Phase Rotation Setting............................................................................................................. 4.82
Figure 4.60 Breaker Failure Logic.............................................................................................................. 4.86
Figure 4.61 Analog Input Card Adaptive Name ......................................................................................... 4.86
Figure 4.62 Settings to Configure Input 1 as a 4–20 mA Transducer Measuring Temperatures
Between –50°C and 150°C ................................................................................................. 4.89
Figure 4.63 Analog Output Number Allocation..........................................................................................4.90
Figure 4.64 Analog Output Settings............................................................................................................4.91
Figure 4.65 DC Mode Processing ............................................................................................................... 4.91
Figure 4.66 AC Mode Processing ............................................................................................................... 4.92
Figure 4.67 Timing Diagram for Debounce Timer Operation When Operating in AC Mode....................4.92
Figure 4.68 Display Point Settings............................................................................................................4.100
Figure 4.69 Front-Panel Display—Both HV and LV Breakers Open....................................................... 4.100
Figure 4.70 Front-Panel Display—HV Breaker Closed, LV Breaker Open .............................................4.101
Figure 4.71 Front-Panel Display—Both HV and LV Breakers Closed.....................................................4.101
Figure 4.72 Front-Panel Display—HV Breaker Open, LV Breaker Closed .............................................4.101
Figure 4.73 Front-Panel Display—HV Breaker Open, LV Breaker Closed .............................................4.101
Figure 4.74 Front-Panel Display for a Binary Entry in the Name String Only.........................................4.102
Figure 4.75 Front-Panel Display for an Analog Entry in the Name String Only......................................4.103
Figure 4.76 Front-Panel Display for an Entry in (a) Boolean Name and Alias Strings and
(b) Analog Name and User Text and Formatting Strings..................................................4.103
Figure 4.77 Front-Panel Display for an Entry in (a) Boolean Name and Alias Strings and
(b) Analog Name, User Text and Formatting Strings, and Engineering Units ................. 4.103
Figure 4.78 Adding Temperature Measurement Display Points............................................................... 4.104
Figure 4.79 Rotating Display .................................................................................................................... 4.105
Figure 4.80 Adding Two Local Bits.......................................................................................................... 4.106
Figure 5.1 Complex Power Measurement Conventions.............................................................................. 5.2
Figure 5.2 METER Command Report With Voltage Option ...................................................................... 5.4
Figure 5.3 METER DIF (Differential) Command Report........................................................................... 5.5
Figure 5.4 METER T Command Report With RTDs..................................................................................5.5
Figure 5.5 METER E Command Report..................................................................................................... 5.6
Figure 5.6 METER RE Command Report.................................................................................................. 5.6
Figure 5.7 METER M Command Report.................................................................................................... 5.7
Figure 5.8 METER RM Command Response............................................................................................. 5.8
Figure 5.9 MET MV Command Report...................................................................................................... 5.8
Figure 5.10 METER RMS Command Report...............................................................................................5.9
Figure 5.11 METER AI Command Report................................................................................................... 5.9
Figure 5.12 METER DEM Command Report ............................................................................................5.10
Figure 5.13 METER P Command Report................................................................................................... 5.10
Figure 5.14 METER H Command Report .................................................................................................. 5.11
Figure 5.15 LDP Command Report ............................................................................................................5.12
Figure 5.16 Transformer Bank Subjected to Through Fault ....................................................................... 5.13
Figure 5.17 Category IV Transformers Through-Fault Protection Curves................................................. 5.13
Figure 5.18 Through-Fault Diagram................................................................................................
...........5.15
Figure
5.19 Result of the TFE Command................................................................................................... 5.17
Figure 5.20 Preload the Values of the Accumulated Data...........................................................................5.18
Figure 6.1 Front-Panel Setting Entry Example........................................................................................... 6.3
Figure 7.1 Simple Ethernet Network Configuration ................................................................................... 7.3
Figure 7.2 Ethernet Network Configuration With Dual Redundant Connections (Failover Mode) ........... 7.3
Figure 7.3 Ethernet Network Configuration With Ring Structure (Switched Mode) ................................. 7.4
Figure 7.4 IRIG-B Input (Relay Terminals B01–B02) ............................................................................... 7.5
Figure 7.5 IRIG-B Input Via EIA-232 Port 3 (SEL Communications Processor as Source) ..................... 7.6
Figure 7.6 IRIG-B Input Via EIA-232 Port 3 (SEL-2401/2404/2407 Time Source).................................. 7.6
Figure 7.7 IRIG-B Input VIA Fiber-Optic EIA-232 Port 2 (SEL-2030/2032 Time Source)...................... 7.6