Siemens RUGGEDCOM ROS v4.3 - Page 111

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Adding an RMON History Control 95
1
Figure48:RMON History Controls Table
1.InsertRecord
2. Click InsertRecord. The RMON History Controls form appears.
10
7
8
1
2
3
4
5
6
9
Figure49:RMON History Controls Form
1.Index Box 2.Port Box 3.Requested Buckets Box 4.Granted Buckets Box 5.Interval Box 6.Owner Box 7.Apply Button
8.Delete Button 9.Reload Button
3. Configure the following parameter(s) as required:
Parameter Description
Index Synopsis:  1 to 65535
Default:  1
The index of this RMON History Contol record.
Port Synopsis:  1 to maximum port number
Default:  1
The port number as seen on the front plate silkscreen of the
switch.
Requested Buckets Synopsis:  1 to 4000
Default:  50
The maximum number of buckets requested for this RMON
collection history group of statistics. The range is 1 to 4000. The
default is 50.