RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Viewing STP Statistics for Ethernet Ports 171
Parameter Description
The actual Hello time provided by the root bridge as learned in
configuration messages. This time is used in designated bridges.
Configured Forward Delay Synopsis:  0 to 65535
The configured Forward Delay time from the Bridge RSTP Parameters
menu.
Learned Forward Delay Synopsis:  0 to 65535
The actual Forward Delay time provided by the root bridge as
learned in configuration messages. This time is used in designated
bridges.
Configured Max Age Synopsis:  0 to 65535
The configured Maximum Age time from the Bridge RSTP Parameters
menu.
Learned Max Age Synopsis:  0 to 65535
The actual Maximum Age time provided by the root bridge as
learned in configuration messages. This time is used in designated
bridges.
Total Topology Changes Synopsis:  0 to 65535
A count of topology changes in the network, as detected on this
bridge through link failures or as signaled from other bridges.
Excessively high or rapidly increasing counts signal network
problems.
Time since Last TC Synopsis:  DDDD days, HH:MM:SS
The time since the last time a topology change was detected by the
bridge.
Section5.2.8
Viewing STP Statistics for Ethernet Ports
To view STP statistics for Ethernet ports, navigate to Spanning Tree» View Port RSTP Statistics . The Port RSTP
Statistics table appears.
Figure99:Port RSTP Statistics Table
To Next Page
Loading...
Need help?
General
