Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Managing Static VLANs 145
4. Click Apply.
Section5.1.5
Managing Static VLANs
The following section describes how to configure and manage static VLANs.
CONTENTS
• Section5.1.5.1, “Viewing a List of Static VLANs”
• Section5.1.5.2, “Adding a Static VLAN”
• Section5.1.5.3, “Deleting a Static VLAN”
Section5.1.5.1
Viewing a List of Static VLANs
To view a list of static VLANs, navigate to Virtual LANs» Configure Static VLANs . The Static VLANs table
appears.
Figure85:Static VLANs Table
If a static VLAN is not listed, add the VLAN. For more information, refer to Section5.1.5.2, “Adding a Static VLAN” .
Section5.1.5.2
Adding a Static VLAN
To add a static VLAN, do the following:
1. Navigate to Virtual LANs» Configure Static VLANs . The Static VLANs table appears.

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English