Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Viewing a List of IP Interfaces 85
• Section3.7.3, “Deleting an IP Interface”
Section3.7.1
Viewing a List of IP Interfaces
To view a list of IP interfaces configured on the device, navigate to Administration» Configure IP Interfaces»
Configure IP Interfaces . The IP Interfaces table appears.
Figure36: IP Interfaces Table
If IP interfaces have not been configured, add IP interfaces as needed. For more information, refer to
Section3.7.2, “Adding an IP Interface” .
Section3.7.2
Adding an IP Interface
To add an IP interface, do the following:
1. Navigate to Administration» Configure IP Interfaces . The IP Interfaces table appears.
1
Figure37: IP Interfaces Table
1.InsertRecord
2. Click InsertRecord. The Switch IP Interfaces form appears.

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English