Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Chapter 5
Setup and Configuration
Managing Multiple Spanning Tree Instances 173
Parameter Description
The count of STP topology change notification messages received
on this port. Excessively high or rapidly increasing counts signal
network problems.
TX Tcns Synopsis:  0 to 4294967295
The count of STP topology change notification messages transmitted
on this port.
Desig Bridge ID Synopsis:  $$ / ##-##-##-##-##-## where $$ is 0 to 65535, ## is 0
to FF
Provided on the root ports of designated bridges, the Bridge
Identifier of the bridge this port is connected to.
operEdge Synopsis:  True or False
The port is operating as an edge port or not.
Section5.2.9
Managing Multiple Spanning Tree Instances
The following section describes how to configure and manage Multiple Spanning Tree Instances.
CONTENTS
• Section5.2.9.1, “Viewing Statistics for Global MSTIs”
• Section5.2.9.2, “Viewing Statistics for Port MSTIs”
• Section5.2.9.3, “Configuring the MST Region Identifier”
• Section5.2.9.4, “Configuring a Global MSTI”
• Section5.2.9.5, “Configuring an MSTI for an Ethernet Port”
Section5.2.9.1
Viewing Statistics for Global MSTIs
To view statistics for global MSTIs, navigate to Spanning Tree» View Bridge MSTI Statistics . The Bridge MSTI
Statistics form appears.

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English