Siemens RUGGEDCOM ROS v4.3 User Manual

Chapter 3
Device Management
RUGGEDCOM ROS
User Guide
94 Managing RMON History Controls
• Section3.10.3, “Managing RMON Events”
Section3.10.1
Managing RMON History Controls
The history controls for Remote Monitoring take samples of the RMON-MIB history statistics of an Ethernet port at
regular intervals.
CONTENTS
• Section3.10.1.1, “Viewing a List of RMON History Controls”
• Section3.10.1.2, “Adding an RMON History Control”
• Section3.10.1.3, “Deleting an RMON History Control”
Section3.10.1.1
Viewing a List of RMON History Controls
To view a list of RMON history controls, navigate to Ethernet Stats» Configure RMON History Controls . The
RMON History Controls table appears.
Figure47:RMON History Controls Table
If history controls have not been configured, add controls as needed. For more information, refer to
Section3.10.1.2, “Adding an RMON History Control” .
Section3.10.1.2
Adding an RMON History Control
To add an RMON history control, do the following:
1. Navigate to Ethernet Stats» Configure RMON History Controls . The RMON History Controls table
appears.

Siemens RUGGEDCOM ROS v4.3 Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROS v4.3
Category	Wireless Router
Language	English