Siemens RUGGEDCOM ROS v4.3 - System Requirements and Documentation Access


Preface
RUGGEDCOM ROS
User Guide
xiv Related Documents
Example Description
command
Commands are in bold.
command parameter
Parameters are in plain text.
command parameter1 parameter2
Parameters are listed in the order they must be entered.
command parameter1 parameter2
Parameters in italics must be replaced with a user-defined value.
command [ parameter1 | parameter2 ]
Alternative parameters are separated by a vertical bar (|).
Square brackets indicate a required choice between two or more
parameters.
command { parameter3 | parameter4 }
Curly brackets indicate an optional parameter(s).
command parameter1 parameter2 { parameter3 |
parameter4 }
All commands and parameters are presented in the order they must
be entered.
Related Documents
Other documents that may be of interest include:
• RUGGEDCOM RS900 Installation Guide
System Requirements
Each workstation used to connect to the RUGGEDCOM ROS interface must meet the following system
requirements:
• Must have one of the following Web browsers installed:
▫ Microsoft Internet Explorer 8.0 or higher
▫ Mozilla Firefox
▫ Google Chrome
▫ Iceweasel/IceCat (Linux Only)
• Must have a working Ethernet interface compatible with at least one of the port types on the RUGGEDCOM
device
• The ability to configure an IP address and netmask on the computer’s Ethernet interface
Accessing Documentation
The latest user documentation for RUGGEDCOM ROS v4.3 is available online at www.siemens.com/ruggedcom. To
request or inquire about a user document, contact Siemens Customer Support.