Siemens RUGGEDCOM ROS v4.3 - Configuring IP Services

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Configuring IP Services 91
2. Select the IP gateway from the table. The IP Gateways form appears.
64
5
2
1
3
Figure45:IP Gateways Form
1.Destination Box 2.Subnet Box 3.Gateway Box 4.Apply Button 5.Delete Button 6.Reload Button
3. Click Delete.
Section3.9
Configuring IP Services
To configure the IP services provided by the device, do the following:
1. Navigate to Administration» Configure IP Services . The IP Services form appears.