Siemens RUGGEDCOM ROS v4.3 - Adding an RMON Alarm

RUGGEDCOM ROS
User Guide
Chapter 3
Device Management
Adding an RMON Alarm 99
Section3.10.2.2
Adding an RMON Alarm
To add an RMON alarm, do the following:
1. Navigate to Ethernet Stats» Configure RMON Alarms . The RMON Alarms table appears.
1
Figure54:RMON Alarms Table
1.InsertRecord
2. Click InsertRecord. The RMON Alarms form appears.
14
12
13
1
2
3
4
5
6
7
8
9
10
11
Figure55:RMON Alarms Form
1.Index Box 2.Variable Box 3.Rising Thr Box 4.Falling Thr Box 5.Value Box 6.Type Options 7.Interval Box 8.Startup
Alarm List 9.Rising Event Box 10.Falling Event Box 11.Owner Box 12.Apply Button 13.Delete Button 14.Reload Button
3. Configure the following parameter(s) as required: