Siemens RUGGEDCOM ROS v4.3 - Viewing a List of Public Keys; Updating a Public Key

RUGGEDCOM ROS
User Guide
Chapter 2
Using ROS
Viewing a List of Public Keys 49
4. Check the system log to make sure the files were properly transferred. For more information about viewing
the system log, refer to Section3.5.1, “Viewing Local Logs” .
Section2.10.2
Viewing a List of Public Keys
Admin users can view a list of existing public keys on the device.
To view public keys, do the following:
1. Log in to the device as an admin user and access the CLI shell. For more information about accessing the CLI
shell, refer to Section2.6, “Using the Command Line Interface” .
2. At the CLI prompt, type:
sshpubkey list
A list of public keys will appear, including their key ID, access level, revocation status, user name and key
fingerprint.
Section2.10.3
Updating a Public Key
Admin users can update public keys.
To update public keys, do the following:
1. Log in to the device as an admin user and access the CLI shell. For more information about accessing the CLI
shell, refer to Section2.6, “Using the Command Line Interface” .
2. At the CLI prompt, type:
sshpubkey list
A list of public keys will appear, including their key ID, access level, revocation status, user name and key
fingerprint.
3. Type the following commands to update the public keys:
Command Description
sshpubkey update_id current_ID
new_ID
Updates the ID of user public key.
NOTE
The user public key ID must be a number between 0 and 9999.
• current_ID is the ID currently assigned to the public key
• new_ID is the ID that will be used to identify the public key going forward
sshpubkey update_al AL
Updates the access level of a user public key.
• AL is the access level (admin, operator or guest) of the public key to be updated
sshpubkey update_rs RS
Updates the revocation status (active, inactive) of a user public key.
• RS is the revocation status of the public key to be updated
sshpubkey update_un UN
Updates the user name of a user public key.
• UN is the user name of the public key to be updated